User I/O Port ( S2); Connectors - Analog Devices EVAL-AD2437B1NZ Evaluation Board Manual

User I/O Port ( S2)

General purpose momentary push button connected to SIO2. There is also a corresponding LED that can be driven
from SIO2. Please see PRM for SIO2 configuration.
Switch Port
S2 SIO2

Connectors

This section describes connector functionality and provides information about mating connectors. The connector
locations are shown in the Connector Locations figure.
P17
P4
P16
P7
P6
P1
Figure 3-2: Connector Locations
EVAL-AD2437B1NZ Manual
P18
P19
P5
P10
P2
P13
Switches
3–3