Table of Contents
Advertisement
L, M (standard), S, and XS platens
1
0.24 inch (6 mm) margins
2
Platen frame
3
Printable area
Parent topic:
Preparing Your Printer
Before transmitting print data from the Garment Creator 2 software, check the printer's status and make
sure that the print head nozzles are not clogged.
Perform a nozzle check to check for clogged nozzles and run a cleaning if necessary.
Attaching the Grip Pad to the Platen
Removing the Grip Pad from the Platen
Attaching or Removing Spacers
Installing the Platen
Changing the Platen Height
Creating Your T-shirt Design
51
Advertisement
Table of Contents
