Table of Contents
Advertisement
Application area size
Letter/A4 and smaller
Larger than letter/A4
Fixing conditions for polyester pre-treatment solution
Application area size
Letter/A4 and smaller
Larger than letter/A4
Note: Optimum conditions may vary depending on the type of heat press used; make sure to test in
advance to determine the correct conditions for your heat press. If traces of the pre-treatment solution
are visible, try washing the T-shirt in water. However, the effects depend on the T-shirt material.
Parent topic:
Creating Your T-shirt Design
After creating the data, use the Garment Creator 2 software to transmit it to the printer.
U.S. and Canada: Visit your product's support website at
(Canada) and select your product to download the Garment Creator 2 software and utilities.
Latin America: Visit your product's support website at
download the Garment Creator 2 software and utilities.
Follow the guidelines in these sections when creating your T-shirt design.
Data Creation and Transmission Guidelines
Printable Area for Each Platen
Parent topic:
Data Creation and Transmission Guidelines
When creating data and transmitting it to the printer using Garment Creator 2, follow these guidelines:
• For best results, select sRGB colors when creating data to be printed on a T-shirt. sRGB colors are
closer to the actual print results.
• You can print in these formats from Garment Creator: TIFF, JPEG, PNG, BMP.
Temperature
338 °F (170 °C)
Temperature
266 °F (130 °C)
Pre-treating a T-shirt
Basic Printing
Time
45 seconds
45–90 seconds
Time
60 seconds
60 seconds
epson.com/support
latin.epson.com/support
47
Pressure
2
6.1 Psi (4.2 N/cm
)
Pressure
2
4.4 Psi (3.0 N/cm
)
(U.S.) or
epson.ca/support
and select your product to
Advertisement
Table of Contents
