Cannot Print Over A Network; Print Head Moves But Nothing Prints - Epson SureColor F2270 User Manual

Cannot Print Over a Network

If you cannot print over a network, try these solutions:
• Make sure that your printer is turned on.
• Make sure you installed your printer's network software as described in the Network Guide.
• If you are using TCP/IP, make sure the printer's IP address is set correctly for your network. If your
network does not assign IP addresses using DHCP, set the IP address manually.
• Check your wired LAN router or access point to see if the LED for the port to which your printer is
connected is on or flashing. If the link LED is off, try the following:
• Make sure the Ethernet cable is securely connected to your printer and to your router, access point,
switch, or hub.
• Try connecting your printer to a different port or a different router, access point, switch, or hub.
• Try connecting with a different Ethernet cable.
• Try printing to your printer from another computer on the network.
• Try connecting your printer directly to the computer using a USB cable.
Parent topic:
Related references
Where to Get Help (U.S. and Canada)
Where to Get Help (Latin America)
Interface Specifications

Print Head Moves But Nothing Prints

If the print head is moving and nothing prints, try these solutions:
• Print a nozzle check pattern and then clean the print head, if necessary. If there are still clogged
nozzles, clean the suction cap and around the print head and then clean the print head again and
check if the clogged nozzles were cleared. If the problem remains, contact your dealer or Epson for
support.
Note: Use a transparent sheet when you are printing a nozzle check pattern with White ink. If you are
using Color ink mode, it is difficult to see the cleaning liquid rows in the nozzle check pattern. There is
no problem if the cleaning liquid rows are the only rows you cannot see.
Solving Printing Problems
167