White Ink Quality Is Poor - Epson SureColor F2270 User Manual

• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if
necessary.
• Align the print head and save the adjustments to a registered media setting.
• Change the Platen Gap setting to Manual.
• Clean the surface of the T-shirt. Remove any lint with sticky tape or a lint roller, and press the fibers
flat with a hard roller when you load a T-shirt on the platen.
• You may need to increase the image resolution or print at a smaller size (optimum image resolution is
360 dpi); see your software documentation for instructions.
• If you are printing over a USB connection and printing does not stop or printed text is corrupted, make
sure you are only using one RIP software open.
Parent topic:
Related references
Media Settings
Related tasks
Aligning the Print Head
Performing a Nozzle Check
Cleaning the Suction Cap
Cleaning Around the Print Head
Cleaning the Print Head

White Ink Quality Is Poor

If you notice that the White ink is uneven, too dark, too light, blurry, or unclear, try these solutions:
• To maintain optimum print quality, remove and shake the installed White ink packs at the start of every
working day or every 24 hours (or when a message is displayed).
• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if
necessary.
• Align the print head.
• Adjust the density of the White ink in the Garment Creator 2 software.
• Make sure the pre-treatment solution is applied evenly or the printed results will be uneven.
• Make sure the pre-treatment solution is not too diluted. If the pre-treatment solution has been diluted
too much, the solidity of the White ink is weakened and the edges of the image may be blurred. Try
Solving Print Quality Problems
176