Advertisement
Chapter 3
Receiving, Unpacking and Inspection
Code
Description
VC
4.25" (108 mm) feedback package with cast
housing and single or vernier (dual) format with
receiver (Harowe 11BRW-300-F-58A or equivalent)
type resolver(s) for use with A-B series 8200 CNC
]
and IMC
120, 121, 123.
VD
4.25" (108 mm) feedback package with cast
housing and single or vernier (dual) format with
transmitter (Harowe 11BRCX-300-C10/6 or
equivalent) type resolver(s) for use with A-B series
8600, MAX and IMC S Class controllers with a
REC 4096 Board.
8
Kit includes Resolver Feedback Package, mounting hardware and 3/8" to 3/8" (9.5 mm to 9.5 mm) resolver to motor mounting coupling.
3-6
Feedback Coupling
1326
–
First Position
Second Position
Bulletin
Type
Number
Code
MOD
7
The feedback coupling is included as standard with all Feedback Mounting Adapter Kits.
Resolver Feedback Package
1326AB
–
MOD
First Position
Second Position
Bulletin
Number
Type
Code
Description
MOD
Modifica-
tion Kit
7
MOD
–
C1
Third Position
Coupling
Size
–
Size
Motor Shaft to Encoder Shaft
Description
Code
3/8" to 3/8" (9.5 mm to 9.5 mm) –
Modifica-
C1
Standard on all 1326AB Motors
tion Kit
1/4" to 3/8" (6.4 mm to 9.5 mm)
C2
–
VC
Third Position
Resolver Feedback
Package
8
Code
Description
1:1
Single device format – 1 turn of the motor shaft to 1 turn of the resolver.
1:2
Single device format – 1 turn of the motor shaft to 2 turns of the resolver.
1:2.5
Single device format – 1 turn of the motor shaft to 2.5 turns of the resolver.
1:5
Single device format – 1 turn of the motor shaft to 5 turns of the resolver.
255
Absolute master/vernier format – 1:1 input/master, 255:256 master/vernier
for IMC 120, 121, 123 only.
256
Absolute master/vernier format – 1:1 input/master, 256:255 master/vernier
for 8600 series and MAX, IMC S class controls with a REC 4096 Board.
424
Absolute master/vernier format – 1:1 input/master, 424:425 master/vernier
for IMC 120, 121, 123 only.
425
Absolute master/vernier format – 1:1 input/master, 425:424 master/vernier
for 8600 series and MAX, IMC S class controls with a REC 4096 Board.
800
Absolute master/vernier format – 1:1 input/master, 800:801 master/vernier
for IMC 120, 121, 123 only.
801
Absolute master/vernier format – 1:1 input/master, 801:800 master/vernier
for 8600 series controllers (is not applicable for use with MAX and IMC S
Class controls)
1:1
Fourth Position
Gear Ratio
Input:Resolver
Advertisement
