3-Digit Display In The Vertical - IBM 6611 Pocket Manual

Changing the Position of the 3-Digit
Display
You can change the position of the 3-digit display so
that it can be read easily when the Model 140 is in
either the vertical or horizontal position.
Changing the 3-Digit Display from Vertical to
Horizontal Position: To change the 3-digit display
from the vertical position to the horizontal position
(with the Model 140 in the horizontal position),
perform the following procedure:
Note: In the following figures, the three 7-segment
characters are lit to show the position of the
display.
Figure
5-9.
3-Digit Display in the Vertical Position with the
Hinged Lens Closed
1. Open the hinged lens.
Character
Holde,
~
Hinged Lens (Open)
Figure 5-10. 3-Digit Display in the Vertical Position with
the Hinged Lens Open
2. Hold the character holder with your fingertips.
Chapter 5. Using the Model 140
5-13