IBM 6611 Pocket Manual page 98

Table 10-2 (Page 2 of 2). Communication Setup
Attributes for the ASCII Terminal or Emulator
Communication Explanations
Setup AHributes SeHings of the SeHings
Break signalt 500
The terminal sends a
500-ms break signal to
the IBM 6611 after the
Break key is pressed.
Send null On The terminal does not
suppress (if send trailing null
supported) characters to the IBM
6611.
Send null (if On
The terminal sends
supported) trailing null characters to
the IBM 6611.
Response 100 The terminal waits 100 ms
delayt
for the IBM 6611 to
respond.
Enter Return
The Enter key functions
as the Return key.
Return New The cursor moves to the
line
next unprotected field
when the Return key is
pressed.
New line CR The Return key generates
the carriage return (CR)
and the line feed (LF)
characters. The line
turnaround occurs after
the CR and LF characters
have been generated.
Send Page
The contents of the
current page are sent to
the IBM 6611 when the
Send key is pressed.
Insert character Space A blank character is
inserted when the Insert
key is pressed.
Chapter 10. ASCII Terminal 10·5