Advertisement
Table 10-1 (Page
2
of
2).
Communication Setup
Attributes for the ASCII Terminal or Emulator
General
Setup
Attributes
Tab
Trace
Settings
Explanations of the Settings
Field
The column tab stops are
ignored, and tab operation
depends on the field attribute
character positions.
All
Both inbound data (data to the
IBM 6611) and outbound data
(data from the IBM 6611) to and
from the main port can be
transferred to the terminal's
auxiliary port without
disturbing communications
with the IBM 6611 when Trace
is pressed.
Communication Setup Attributes:
The settings
for the attributes in Table 10-2 on page 10-4 are
based on the assumption that the ASCII terminal or
emulator is directly connected to the serial port of
the IBM 6611. If the ASCII terminal communicates
with the IBM 6611 via a modem connected to the
serial port, a different setting for some attributes
may be required. A dagger (t) indicates those
attributes that may require different settings. The
appropriate setting depends on the type of modem
and the communication line. Not all functions exist
in all terminal models.
Chapter 10. ASCII Terminal
10-3
Advertisement
Chapters
