IBM 6611 Pocket Manual page 97

Table 10-2 (Page 1 of 2). Communication Setup
Attributes for the ASCII Terminal or Emulator
Communication Explanations
Setup Attributes Settings of the Settings
Operating mode Echo
Data entered from the
keyboard on the terminal
is sent to the system unit
for translation and then
back to the display panel.
Echo mode is also called
conversation mode.
Line speedt
2400, Uses 9600-bps,
9600, 19200-bps, or 38400-bps
19200,
line speeds to
38400 communicate with the
IBM 6611 for a
direct-attached terminal.
Uses 2400-bps line speed
to communicate with the
IBM 6611 for a
modem-attached
terminal.
Word length 8
The data word length is 8
bits.
Parity No
Does not add a parity bit,
and is used together with
the word length attribute
to form the 8-bit data
word (byte).
Stop bit Places 1 bit after a data
word.
Turnaround CR
The carriage return (CR)
character
character is used as the
line turnaround character.
Interface
RS232C
Uses the EIA 232-C
electrical interface
protocol.
Line controlt IPRTS Uses the permanent
request to send (IPRTS)
signal to communicate
with the IBM 6611.
10-4
6611 Operations Pocket Guide