Advertisement
Terminal Cable
Model 120: You must provide a cable to connect
the ASCII terminal or emulator to the EIA 232 serial
port. A terminal interposer is shipped with the
Model 120. You need the terminal interposer to
connect the terminal cable to the IBM 6611 as
illustrated in Table 10-3 and Figure 10-1.
Table 10-3. ASCII Terminal Connection to an EIA 232 Serial
Port for Model 120
Index
Name
Description
A
EIA 232 serial port
25-pin 0, male
B
Terminal cable
25-pin 0, female
connector, IBM
6611 end
C
Terminal cable
Customer supplied
D
Terminal
Shipped with the IBM
interposer
6611
Note: A gender matcher may be required to connect your
terminal to the terminal interposer.
ASCII Terminal or
Emulator
Figure 10-1. Connecting a Terminal to an EIA 232 Serial
Port for Model 120
Models 140 and 170: You must provide a cable to
connect the ASCII terminal or emulator to the EIA
232 serial port. Two 10-to-25-pin converter cables
and a terminal interposer are shipped with the IBM
6611. You need one of these converter cables and
the terminal interposer to connect the terminal
cable to the IBM 6611, as illustrated in Table 10-4
on page 10-7 and Figure 10-2 on page 10-7.
10-6
6611 Operations Pocket Guide
Advertisement
Chapters
