Table of Contents
Advertisement
Hoists of table 1:
Capacities from 1t up to 6,3t
Hoists of table 2:
Capacities from 10t up to 30t
Only for hoists of 10000kg and 12000kg capacity
DANGER!
Should the customer/operator use a load chain that is too short so that the load hook does not reach the
ground, this is „no appropriate use" of the hoist !
This may lead to unforeseeable danger, with injury of persons or damage of equipment!
HADEF is not liable for any damage or injury that results hereof!
1 chain end fastening
2 chain slide
3 tube
If the load chain is selected too short, it would pull
against the bolt of the chain end fastening (1) and
destroy the chain slide (2) and the tube (3).
4.3
Functions
The load is lifted or lowered by pulling one of the chain falls of the endless hand chain of the hoist. A load
pressure brake prevents automatic lowering of the load after releasing the hand chain.
In combination with hand geared trolleys, the trolley is moved to the left or to the right side by pulling the
hand chain.
In combination with push travel trolleys the trolley is moved by pushing or pulling the load or, without load, by
pulling the load chain.
NOTICE!
The best protection against functional failures in case of extreme environmental impact is the regular use of
the equipment.
4.4
Important components
Gear
Gear components are made of high-quality material.
Load pressure brake
Holds the load in any position. Hardened safety pawls.
Housing
Depending on the model made from steel plate or aluminium die-casting (Not for explosion proof equipment).
In case of ex proof hoists, the housing is only made of steel plates.
Load chain
According to EN 818-7-T high quality chain. All components match precisely to each other. Therefore please
only use original chains.
12
Illustration 3
Illustration 4
Illustration 5
5.52.182.01.01.05
Advertisement
Table of Contents
