Advertisement
11. Set the stop distance to 30 ft.
12. Set number of points to 500.
13. Close the instrument settings tab and ensure the DTF enable soft key displays
DTF on. See
22144016
October 2022
Figure 6-5
and
Figure 6-6
Figure 6-5 DTF (Distance to Fault) and Calibration
CX100 ComXpert Test and Measurement Guide
Chapter 6 Performing VSWR and DTF Tests
Performing Distance to Fault (DTF) Tests
for screen examples.
0
Rev 000
6 - 7
Advertisement
Chapters
