6 HOW TO START THE INSTALLATION OVER: CLEARING PROFILES
•
After setting a local PC to the same subnet as the ProtoNode (Section
on the PC and enter the IP Address of the ProtoNode; the default address is 192.168.1.24.
•
If the IP Address of the ProtoNode has been changed by previous configuration, the assigned IP
Address will need to be obtained from the network administrator.
•
The Web Configurator will be displayed as the landing page.
•
At the bottom-left of the page, click the "Clear Profiles and Restart" button.
•
Once restart is complete, all past profiles discovered and/or added via Web configurator are
deleted. The unit can now be reinstalled.
Page 26 of 50
ProtoNode Startup Guide
4.1),
open a web browser
Need help?
Do you have a question about the ProtoNode FPC-N34 and is the answer not in the manual?