Factory Reset; Figure 46 User Management; Figure 47 User Table - Z3 Technology ZCube-SC User Manual

(4) The new user will appear in the User table.
(5) To login as the new user, click the logout button in the top right of the web interface. You will be
prompted to login. Login with new credentials.

8.7 Factory Reset

The ZCube-SC can be reset to its original factory settings using the pinhole reset on the lower right of
the I/O PCB of the unit.
______________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8

Figure 46 User Management

Figure 47 User Table

47
th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
ZCube-SC User Guide
DOC-USR-0265-01