Table of Contents
Advertisement
7. INSTALLATION:
STEPS 5 through 7 (filter model only)
Note: If this unit is equipped with a two stage filtration system, then the remedi
filter was shipped installed. The VersaFilter III was placed in the cooler for
shipping.
5.
Unpack the VersaFilter III and remove the sanitary cap.
6.
Looking at the filter top, orient the filter so that the rectangular lug, on top
of the filter faces forward.
7.
Push the filter up into the filter housing and rotate the filter one-quarter
turn to the right until it stops turning. Refer to Diagram 5.
Lug
VERSAFILTER III
DIAGRAM 5
Remedi Filter –
shown in Green
Filter housing was
installed at the
factory.
IMPORTANT: When
replacing filter
cartridge, turn OFF
water supply.
Depressurize water
lines prior to removal
of filter housing from
the quarter turn
filter head assembly
.
11
Advertisement
Table of Contents
