Table of Contents
Advertisement
3-3-2. Selecting a Particular Portion (Start ID) with a
Program Number
Writing the program number
Refer to "3-1-3. Writing sub codes".
Selecting a start ID with a program number (Program search)
1 During playback, press MODE to display the program number.
Current program number
2 Press SEARCH.
Current program number
Desired program number
Blinks.
Lights up.
3 Enter the desired program number (1 to 99).
Single digit of the number:
Use pp» FF.
Double digtis of the number: Use <q REW.
4 Press SEARCH.
When the desired program number is found, playback starts from that portion.
Note on program search
When "Pno-~" is displayed
If the program number is not written successively, or a
This indication appears when no program number is
Start ID is added between the program numbers, program
written on the tape or when the unit could not find the
search may not be correctly done. In this case, stop the
number.
tape by pressing m STOP.
36 (E)
Advertisement
Table of Contents
