Table of Contents
Advertisement
Searching for the start ID
1 Press SEARCH.
SEARCH indicator appears in the display window.
2 Press pp FF or <4 REW the number of times the start ID is to be skipped.
pp FF: Searches for the start ID ahead of the current position.
<@<@ REW:
Searches for the start ID behind the current position.
The number of times the key is pressed is indicated in the seconds position.
When the desired start ID is reached, the indication shows "0", returns to the
original indication, and then starts play.
Surveying the start ID portion (Music scan)
With this function, the portions of the tape where the start ID recorded portion are
written (approx. 9 seconds each) are played back successively.
1 Press SEARCH during playback.
SEARCH indication appears in the display.
2 Press pm» PLAY.
& and << pw indicator light up in the display.
3 Activate the music scan function.
To scan from the tape top: press Bm PLAY (the tape is rewound to the tape top
automatically).
To scan forward from the current position: press »» FF.
To scan backwards from the current position: press <q REW.
During music scan, the indication in the display blinks.
To release music scan and continue playback
Press p PLAY while the !D indicator is blinking.
The blinking counter lights up steadily.
When "Pno" is displayed
Searching for the start ID cannot be done. Change the
display to the counter indication or the remaining time
indication using the MODE selector.
35 (E)
TEL Ta
Advertisement
Table of Contents
