Table of Contents
Advertisement
@ Cassette holder
@® EMPHASIS switch
Switches the pre-emphasis circuit on and off while recording the analog input signal.
The setting of this switch does not affect the playback and digital recording.
e During playback, the de-emphasis circuit activates according to the emphasis
information on the tape being played back.)
e During digital recording, the emphasis information in the input signal is recorded as
it is.
When the switch is set to ON, the EMPHASIS
indicator appears in the display.
Factory preset setting: OFF
@® WORD SYNC selector
Selects the reference sync signal of this unit during recording and playback.
| Setting
_
Selected reference sync signal
EXT*
External word sync signal input to the WORD SYNC connector on the left
panel (EXT SYNC indicator lights up).
| INT
| Internal word sync signal generated in the unit.
Factory setting: INT
@ Fs (sampling frequency) selelctor
When recording analog input signals, select the sampling frequency, 48kHz, 44.1kHz or
44.056kHz. The selected frequency is indicated in the display. * *
During playback, the sampling frequency on the tape is automatically selected.
(However, when the WORD
SYNC selector is set to EXT, set the selector in
accordance with the frequency of the input reference signal).
Factory preset setting: 48kHz
® EJECT tab
Slide the tab toward you to remove the cassette. When a cassette is loaded, first
press the LOAD/UNLOAD key to unload the tape from the drum.
(D LOAD/UNLOAD key
After inserting the cassette, press this key to load the tape around the drum or to
unload the tape from the drum. The lamp blinks to show that the tape is being loaded
or unloaded.
* Notes on setting the WORD
SYNC selector to EXT
* * Notes on the display of sampling frequency
* Select the reference sampling frequency of the input
While a non-recorded area on the tape is playing back
signal with the Fs selector.
or advancing, the sampling frequency blinks.
For recording: Select the desired frequency.
For play back: Set the selector to the frequency
corresponding to that on the tape.
* If a word sync signal is not input to the WORD
SYNC
connector, the unit will not activate correctly.
17 (E)
Advertisement
Table of Contents
