Sony PCM-2000 Operation Manual page 18

Inside of the cassette compartment lid
iB LTC REC key and lamp UD INPUT SELECT switch
if!) SKIP switch ih) Cassette holder
Fetkhz}
(EJECT. LOAD/UNLOAD =. |
{FFs selector (h) Eject tab {[3) LOAD/UNLOAD key
{kK} WORD SYNC selector
(y2. EMPHASIS switch
ae ey,
8) LTC REC (longitudinal time code record) key and lamp
During recording and playback, the time code of an external time code generator input
to the LTC IN connector (on the left panel of the unit) is recorded on the tape. The
red lamp lights up when the key is pressed, and the TIME CODE indicator is
displayed. If the safety tab of the cassette is open, the time code cannot be recorded.
With another press of the key, the recording mode of the time code will be canceled.
© INPUT SELECT switch
Selects the input source for recording.
DIG (digital): For recording the signals input to the DIGITAL IN connector.
ANA (analog): For recording the signals input to the MIC/LINE input connector.
Factory preset setting: ANA
10) SKIP switch Selects the ID to write during playback, and selects whether or not to activate the
skip function.
Recording mode Playback mode
Setting |
To write To write | To erase | Skip function
sl
Skip ID Skip ID | Yes
Start ID
OFF Start ID Start ID | No
When the switch is set to ON, SKIP indicator appears in the display.
Factory preset setting: OFF
16 (E)