Rotary Engraving Process; Installation And Commissioning - Trotec Speedy 100 flexx Operating Manual

Max. workpiece diameter: 4.6 inch (118 mm)
Max. workpiece length cones: 13.8 inch (350 mm)
Rotary attachment with cones
8.11.2

Rotary engraving process

1. Create a graphic using the graphics soware.
2. Select the Rotary engraving option from the
menu bar and specify the diameter of the item.
3. Select the job from the list and place it in the
marking field.
4. Start the engraving process.
8.11.3

Installation and commissioning

Operation
59