Connection Of Additional Components; Exhaust System - Trotec Speedy 100 flexx Operating Manual

Connection of additional components

7 Connection of additional components
7.1

Exhaust system

Warning Current
Wrong voltage can cause damage to the machine.
Do not operate the machine, if the mains voltage does not match the voltage required by the exhaust
system, as this may cause damage to the machine.
Make sure that the mains voltage matches the voltage required by the exhaust system.
Connecting:
1. When using an original Trotec exhaust system, also connect this, using the exhaust connection cable included, to
the exhaust cable connection on the laser.
2. Plug the ends of the exhaust hose into the exhaust nozzle that is intended for this purpose on the exhaust system
and on the laser. The position of the connector depends on the type of the exhaust system.
3. Plug in the mains cable of your exhaust system into the mains socket.
Follow the operation and maintenance instructions in the Manual of the exhaust system.
44
❶ Intake connector for exhaust hose
❷ Connector for exhaust connection cable
❸ Main cable to main socket
❹ Safety switch