Connections; Mains Connection - Trotec Speedy 100 flexx Operating Manual

6.5

Connections

6.5.1

Mains connection

Connect the end of the mains connection cable to the main connection socket.
Warning Current
Wrong voltage can cause damage to the machine.
Do not operate the machine, if the mains voltage does not match the voltage required by the exhaust
system, as this may cause damage to the machine.
Make sure that the mains voltage matches the voltage required by the exhaust system.
Notice
Depending on the laser type and region, the main fuses (6) are either covered or open next to the
connector.
Setup and installation
43