Lateral Air Assist - Trotec Speedy 100 flexx Operating Manual

Operation
8.10

Lateral air assist

SPEEDY 100
During laser engraving and laser cutting, the supply of compressed air can significantly influence and improve results.
Air assist is oen used with vector cutting applications to derive heat and flammable gases from the cutting surface.
Through a constant airflow over the whole cutting surface, fire sources will be removed and fume is reduced. In addition,
air assist improves engraving dust removal.
According to used lens the position of the air assist nozzle must be adapted accordingly. Small leads on the holder mark
the single positions.
SPEEDY 100 FIBER
According to used lens the position of the air assist nozzle must be adapted accordingly. Small leads on the holder mark
the single positions.
57