ICP DAS USA ET-2242 User Manual page 50

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
ET-2200 Series Ethernet I/O Modules
Item
Enable PWM
This parameter is used to enable the PWM output function.
This parameter is used to enable the PWM output alarm
Enable PWM Alarm
function when Host/Slave watchdog timeout.
This parameter is used to set the duty cycle for the DO
channels. Two values are required for each DO channel.
Duty Cycle The first value is the high pulse width, while the second is
the low pulse width. The duty cycle is in 1 ms units, and the
resolution is approximately 5 ms. (10 to 65535 ms). A value
of 0 will disable the duty cycle functions for that channel.
Update Settings
Click this button to save the revised settings to the ET-2200 module.
Note: Because of the characteristics of the relay functions, it is recommended that the PWM
on ET-2260/2261/2268 module (i.e., modules with relay functions) is not used for extended
periods of time.
Copyright © 2016 ICP DAS CO., Ltd. All Rights Reserved.
Description Default
Value
0
0
1000 (ms)
- 50 -