ICP DAS USA ET-2242 User Manual page 37

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru
ET-2200 Series Ethernet I/O Modules
Item
Address Type
Static IP Address
Subnet Mask
Default Gateway
MAC Address
Modbus TCP Slave
Local Modbus TCP port
Local Modbus NetID
Update Settings
Copyright © 2016 ICP DAS CO., Ltd. All Rights Reserved.
Description
Static IP: If there is no DHCP server installed in your network, you can
configure the network settings manually. Refer to
Ma ual Co figuratio
DHCP: Dynamic Host Configuration Protocol (DHCP) is a network
application protocol that automatically assigns an IP address to each
Section 4.3.1.1 Dy a i Co figuratio
device. Refer to
Each ET-2200 module connected to the network must have its own
unique IP address. This parameter is used to assign a specific IP address.
This parameter is used to assign the subnet mask for the ET-2200
module. The subnet mask indicates which portion of the IP address is
used to identify the local network or subnet.
This parameter is used to assign the IP Address of the Gateway to be
used by the ET-2200 module. A Gateway (or router) is a device that is
used to connect an individual network to one or more additional
networks.
This parameter is used to set the User-defined MAC address, which must
be in the format FF-FF-FF-FF-FF-FF.
This parameter is used to set the local port to be used by the Modbus
slave device. The default value is 502.
This parameter is used to set the Network ID to be used by the Modbus
slave device. The default value is 1.
Click this button to save the revised settings to the ET-2200 module.
for more details.
Section 4.3.1.2
for more details.
- 37 -