ICP DAS USA ET-2200 Series Manual
Firmware update via ethernet
Hide thumbs
Also See for ET-2200 Series:
- User manual (125 pages) ,
- Quick start manual (8 pages) ,
- User manual (93 pages)
Advertisement
Quick Links
S
UPPORT
Models supported include ET-2260 and ET-2254.
W
ARRANTY
All products manufactured by ICP DAS are warranted
against defective materials for a period of one year from
the date of delivery to the original purchaser.
W
ARNING
ICP DAS assumes no liability for damages consequent to
the use of this product. ICP DAS reserves the right to
change this manual at any time without notice. The
information furnished by ICP DAS is believed to be
accurate and reliable. However, no responsibility is
assumed by ICP DAS for its use, nor for any infringements
of patents or other rights of third parties resulting from its
use.
C
OPYRIGHT
Copyright © 2015 by ICP DAS. All rights are reserved.
T
RADEMARKS
Names are used for identification purposes only and may
be registered trademarks of their respective companies.
C
U
ONTACT
S
If you have any questions, please feel free to contact us
via email at:
service@icpdas.com
or
You will generally receive a response within 2 working
days.
service.icpdas@gmail.com
ET-2200 Series
Firmware Update via Ethernet
Version: 1.0/ Updated: Sep. 2015
Ch. 1. Setting up the ET-2200
Ch. 2. Firmware Update Procedure
Ch. 3. Troubleshooting
Ch. 4. Additional Information
ICP DAS CO., LTD.
Website: http://www.icpdas.com
Advertisement
Related Manuals for ICP DAS USA ET-2200 Series
Summary of Contents for ICP DAS USA ET-2200 Series
- Page 1 ET-2200 Series UPPORT Models supported include ET-2260 and ET-2254. Firmware Update via Ethernet ARRANTY All products manufactured by ICP DAS are warranted against defective materials for a period of one year from Version: 1.0/ Updated: Sep. 2015 the date of delivery to the original purchaser.
- Page 2 1. Setting up the ET-2200 Before updating the firmware, ensure that the network settings for both your host computer and any ET-2200 modules are correctly configured, or the update procedures via the Ethernet network may not function correctly. Step 1: Connect the ET-2200 to the same hub or the same sub-network as your Host PC, and attach a power supply to the ET-2200.
-
Page 3: Firmware Update Procedure
2. Firmware Update Procedure Two methods can be used to update the firmware: “Local Firmware Update” (traditional) “Remote Firmware Update” (TeamViewer). The Local Firmware Update option requires the user to manually adjust the position of the Init/Run Switch and reboot the module in order to initialize the of firmware update. - Page 4 Step 4: In the “Open” dialog box, select the firmware file (ET2200H.dat) that will be used to update the module, and then click “Open” button. Download the Firmware File. Step 5: Assign a valid IP Address and the factory-default MAC Address for the ET-2200 module.
- Page 5 Step 8: Set the “Init Switch” on the ET-2200 module to the “Init” position. Step 9: Power-on reset the ET-2200 module in “Init Mode” to initiate the update. Step 10: Confirm that the two MAC addresses (factory-default) listed in the Command Prompt window, “Waiting request from MAC x.x.x.x”...
- Page 6 Step 13: In the eSearch Utility, search for the ET-2200 module again to verify that it is functioning correctly. Note that the network settings for the module may need to be reconfigured after updating the firmware. Refer to Step 3 in Section 1 above for more details.
- Page 7 2.2 Remote Firmware Update In order to perform a Remote Firmware Update, use an application that allows an external system to be remotely controlled, such as TeamViewer, in order to create a connection between the local and the remote system. Note that all firmware update procedures need to be carried out on the remote system.
- Page 8 Step 4: In the “Open” dialog box, select the firmware file (ET2200H.dat) that will be used to update the module, and then click the “Open” button. Download the Firmware File. Step 5: Assign a valid IP Address and the factory-default MAC Address for the ET-2200 module.
- Page 9 Step 8: Open a web browser such as Internet Explorer or Firefox and enter the URL for the ET-2200 in the address bar of the browser and log in to the web configuration pages (use the default usemanme and password “Admin”). Step 9: Click the “Network”...
- Page 10 Step 11: Confirm that the two MAC addresses (factory-default) listed in the Command Prompt window, “Waiting request from MAC x.x.x.x” “BOOTPREQ from MAC: x.x.x.x”, are the same, as indicated in the image below. If these addresses do not match, the update cannot proceed.
- Page 11 Step 16: Log in to the web configuration pages for the ET-2200 (use the default username password and “Admin”). Step 17: Verify that the version and date details for the firmware are correct. Firmware Update via Ethernet (Ver. 1.0/Sep. 2015) Page: 10...
-
Page 12: Troubleshooting
3. Troubleshooting 3.1 Firmware update in BOOTP mode If the module is not functioning correctly (e.g., if there is no response to the search request, or if system continuously either on or off), download new image of the firmware from the ICPDAS web site and then update the firmware for the module using the following procedure. - Page 13 Step 4: Right click the “BOOTP” entry in the Name field and then select the “Firmware Update” item from the popup menu. Step 5: Refer to Steps 4 to 17 (Pages 2 to 5) in “Chapter 2-Firmware Update Procedure” for details of how to complete the update process.
-
Page 14: Additional Information
If the firmware update fails, simply execute the update procedure again in BOOTP mode, as described in Chapter 3, and the update should be successful. The ET-2200 series obtains the IP address assigned by the user and retrieves the firmware image through the utility program. - Page 15 MAC address in the firmware update window, as described in Step 5 on Page 3. The firmware update procedure is illustrated in the figure below. eSearch Utility ET-2200 Series Checks whether the received MAC Broadcasts its MAC address BOOTP...