Transporting - H&S TF6128 Operation Manual

NOTE: Determine right or left side of the Merger by viewing it from the rear. If instructions or parts lists
call for hardened bolts, refer to Cap Screw Torque Values chart.
• Check the Merger for proper assembly and adjustment. Make sure that all bolts are tightened.
Securely retighten after a few hours of operation as bolts can loosen up on new machinery.
• If the merger was shipped w/o the rims/tire assemblies attached, Attach the rims/tire assemblies,
using the lug nuts furnished. Torque the mounting hardware to correct torque specification. Check
the wheel bolts periodically thereafter.
• Check tires and inflate to the recommended pressure. (15R19 x19.5 Radial Tires = 70 PSI)
• Lubricate the Merger completely (Refer to the Lubrication section in this Manual).
TOWING ON THE HIGHWAY
Follow state and local regulations when towing farm equipment on public highways. Never tow the Windrow
Merger on a public highway at a speed greater than 20 m.p.h. (32 kph).
LIGHTS & REFLECTORS
Lights and reflective safety decals are on the Merger for the safety of the operator and others around the
machine. Lights and decals should be repaired or replaced immediately, if they are no longer wokring,
damaged or become dull.
SET-UP & ASSEMBLY

TRANSPORTING

-19-