Table of Contents
Advertisement
ANNUAL SERVICE
Oil Filter
The hydraulic oil filter should be changed at least once a year or prior if filter becomes clogged during
the season.
To change the filter;
1. Unscrew the filter cover.
2. Carefully remove & discard the used filter cartridge.
3. Insert the new oil filter cartridge.
4. Replace filter cover.
Head Gearboxes
Each head is powered by a gearbox in the center of the head.
Each center cam gearbox uses 26 ounces of SAE 30W motor oil.
The oil in each gearbox should be checked before each crop and
changed on an annual basis.
Oil is drained by removing the lower cover. This is accomplished by
removing the 4 bolts (A).
When reinstalling cover, inspect the O-ring (PN 82330) for damage
and replace as necessary. Ensure that the O-ring is properly seated
in its groove when replacing the cover.
Add oil and check at the fill plug (B)
SERVICE
A
-34-
B
Advertisement
Table of Contents
