Operator Display - H&S TF6128 Operation Manual

CONTROL BOX FUNCTIONS
The following screens show the functions of the the control box. The 1st button on LH side of the display
is the belt discharge ON/OFF button. The bar graph on the bottom indicates the manual inch setting of
the skid shoes.
The display above shows the belt discharge to
the LEFT by pressing the 2nd button (underlined)
on the LH side, and in the OFF position by pressing
the 1st button on the left side of the display.
The display above shows the belt discharge to the
RIGHT by pressing the 2nd button (underlined) on
the RH side, and in the ON position by pressing the
1st button on the left side of the display.
SINGLE HEAD MERGING: The display above
shows the LH HEAD belt discharge to the LEFT
(underlined) and the RH HEAD OFF by pressing the
4th button on the RH side, and in the ON position by
pressing the 1st button on the left side of the display.
The same process can be done with the RH HEAD.

OPERATOR DISPLAY

The display above shows the belt discharge to the
LEFT by pressing the 2nd button (underlined) on
the LH side, and in the ON position by pressing the
1st button on the left side of the display.
The display above shows the belt discharge SPLIT
left and right by pressing the 1st button (underlined)
on the RH side, and in the ON position by pressing
the 1st button on the left side of the display.
The display above shows the SOFT SHOE
PRESSURE on the 2nd page of the display. Press
the right arrow on the bottom LH button to get to the
SOFT SHOE PRESSURE adjustment. Decrease
the pressure by pressing the 4th button on the LH
side. Increase the pressure by pressing the 4th
button on the RH side.
-24-