Open Scan (Os) Mode - Uniden UH835S Series Owner's Manual

Operation
Add/Remove Channels from Memory
1. Select which Scanning Mode you wish to use on the channel OS, GS
or M.SCAN Mode.
OS
NOTE
2 . Select the channel you want to store by pressing ▼or ▲.
3. Press and hold [
4. To remove the channel from Memory, Press and hold [
to remove. M icon disappears.

Open Scan (OS) Mode

Open Scan is the default scan mode.
All UHF-CB have been added to the OS SCAN Memory for convenience.
To add/remove channels from OS SCAN Memory, refer to p.17.
Allows continuous scanning of all selected channels. If an active channel
is found, scanning will stop on that channel. If the received signal
ceases, the unit will wait 2 seconds for the signal to return, otherwise
scanning resumes.
After transmission in scan mode, the scan mode will be cancelled.
To select OS scan mode,
Press and hold the [SCAN| OS/GS/MS] key.
OS Mode is indicated by the absence of the
GS and M.SCAN icons.
NOTE
If SCAN is deactivated while on an active channel, the
radio will stay on that active channel. If no channels are
active, the radio will reinstate the starting channel.
NOTE
UNIDEN UH835S/UH850/UH850S
is indicated by the absence of the GS or M.SCAN icon.
MENU/MEM]
to store.
17
MENU/MEM]
Handheld UHF-CB Transceiver