Operation
Open Scan (OS) Mode
Allows continuous scanning of all selected channels.
If an active channel is found, scanning will stop on that channel.
If the received signal ceases, the unit will wait 3 seconds for the signal to return,
otherwise scanning resumes.
To skip the active channel, press [MEM] momentarily. Scanning resumes. To deactivate
SCAN, press [SCAN] or the PTT button on the microphone.
If SCAN is deactivated while on an active channel, the UH5040R will
stay on that active channel. If no channels are active, the UH5040R will
reinstate the starting channel.
NOTE
OS Mode is indicated by the absence of the GS icon.
NOTE
UNIDEN UH5040R
16
UHF CB Transceiver