Operation
5. Press and hold the [
Mode.
If a button is not pressed within 10 seconds the UHF CB
Radio will automatically exit the Menu Mode.
NOTE
Open Scan (OS) Mode
All UHF-CB have been added to the OS SCAN Memory for convenience.
To add/remove channels from OS SCAN Memory, refer to p.17.
Allows continuous scanning of all selected channels. If an active channel
is found, scanning will stop on that channel. If the received signal
ceases, the unit will wait 2 seconds for the signal to return, otherwise
scanning re s u mes.
After transmission in scan mode, the scan mode will be cancelled.
To select OS scan mode,
1. Press [MENU/MEM] 7 times.
2. Press ▲ or ▼ to change the setting to SCAN (Open Scan).
3. Press & hold [MENU/MEM] to save and exit.
OS Mode is indicated by the absence of the
GS and M.SCAN icons.
NOTE
If SCAN is deactivated while on an active channel, the
radio will stay on that active channel. If no channels are
active, the radio will reinstate the starting channel.
NOTE
UNIDEN UH810S/UH820S
to save and exit from the Menu
MENU/MEM]
20
Handheld UHF-CB Transceiver