Do you have a question about the UH35 and is the answer not in the manual?
Questions and answers
Martin cousens
March 27, 2025
When I turn on my UH35 I just get static, how can I fix this?
1 comments:
Mr. Anderson
March 27, 2025
To reduce static on your Uniden UH35, use the Automatic Squelch feature, which mutes weak transmissions and unwanted noise. If static persists, try using the Monitor function to check for weak signals:
1. Press and hold the Volume button for 2 seconds to enable Monitor mode. 2. If there is no signal, you will hear noise. 3. To return to normal mode, press and hold the Volume button again for 2 seconds or press the key once.
Additionally, using a repeater in Duplex mode (CH01-CH08 and CH41-CH48) may help improve signal clarity by overcoming obstructions.
Page 1
Uniden UHF Handheld and CB Radio Troubleshooting Model Controls & Indicators Reset Procedure UH35 Antenna Turn the unit off, Press and hold PTT (Push-To-Talk) Button “[channel ▲] and [vol▲]” buttons Channel/Scan up Key together at the same time and Duplex/Keylock Key turn the power back on.
Page 2
Model Controls & Indicators Reset Procedure UH850S Antenna Turn the unit off, Press and hold MON/Keylock ‘’MENU’’& “[▲]”buttons together Rotary Vol/Power Knob at the same time and turn the Speaker power back on. After 15 seconds Accy Speaker MIC Jack turn power back off then on.
Page 3
UH9000 Controls & Indicators Reset Procedure Turn the base off, Press and hold ‘’MENU’’& “SCAN” buttons together at the same time and turn the power back on. After 15 seconds turn power back off then 1 MIC Jack 2 Liquid Crystal Display (LCD) Menu Button/Monitor function (press &...
Page 4
UH9060/UH9080 Controls & Indicators Reset Procedure • Initialize to factory setting not including recorded audio. Turn the unit off, Press and hold ‘’MENU’’& “REPLAY” buttons on the MIC together at the same time and turn the power back on. After 15 seconds turn power back off then on •...
Page 5
Battery not hold charging (handheld only) Order battery from Uniden Spareparts. Antenna Malfunction If Antenna Rib is broken, you can order it from Uniden Spareparts. Others, we would suggest the customer to go to antenna specialist to check the performance with specification.
Need help?
Do you have a question about the UH35 and is the answer not in the manual?
Questions and answers
When I turn on my UH35 I just get static, how can I fix this?
To reduce static on your Uniden UH35, use the Automatic Squelch feature, which mutes weak transmissions and unwanted noise. If static persists, try using the Monitor function to check for weak signals:
1. Press and hold the Volume button for 2 seconds to enable Monitor mode.
2. If there is no signal, you will hear noise.
3. To return to normal mode, press and hold the Volume button again for 2 seconds or press the key once.
Additionally, using a repeater in Duplex mode (CH01-CH08 and CH41-CH48) may help improve signal clarity by overcoming obstructions.
This answer is automatically generated