Transmit Power Select; Smart-Key Function; Scanning - Uniden UH835S Series Owner's Manual

Operation

Transmit Power Select

This radio has two transmit power levels:
Hi: 3.5 Watt (UH835S) /
5.0 Watt (UH850/UH850S)
Lo: 1.0 Watt.
To change your transmit power level:
1. Press [MENU/MEM].
2. Press or
setting to Hi or Lo.
3. Press & hold [MENU/MEM] to save and
exit.

Smart-key Function

The smart key [S] provides one touch access to one of these functions; Instant
Channel, Call Tone or Equalizer.
Press & hold [S] to change the smart key function between the three options.

Scanning

There are 3 scanning modes;
Open Scan (OS),
Group Scan (GS) and
Master Scan (M.SCN) (a special case of Group Scan).
During SCAN the radio only checks channels or frequencies that are
in the SCAN Memory, which are indicated by the M (memory) icon. The
radio maintains two SCAN Memories; one for Open Scan (OS) mode
and the other for Group Scan (GS) mode, to give you flexibility and allow
you to use the radio more effectively.
Group Scan and Master Scan modes share the same SCAN
Memory.
NOTE
UNIDEN UH835S/UH850/UH850S
to change the
15
Handheld UHF-CB Transceiver
TX Power High
TX Power Low