Directed Directechs DB3 Installation Manual
  1. Manuals
  2. Brands
  3. Directed Manuals
  4. Automobile Accessories
  5. Directechs DB3
  6. Installation manual

Directed Directechs DB3 Installation Manual

Smart key for 2013 mazda 3
Hide thumbs Also See for Directechs DB3:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTALLATION GUIDE
DB3
2013 Mazda 3 (Smart Key). 403.MA1 4.07
Designed by Installers for Installers
© 2020 Directed, Vista CA
This product is intended for installation by a professional installer only! Attempts to install this
product by a person other than a trained professional may result in severe damage to a vehicle's
electrical system and components.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Directechs DB3 and is the answer not in the manual?

Questions and answers

Related Manuals for Directed Directechs DB3

Summary of Contents for Directed Directechs DB3

  • Page 1 2013 Mazda 3 (Smart Key). 403.MA1 4.07 Designed by Installers for Installers © 2020 Directed, Vista CA This product is intended for installation by a professional installer only! Attempts to install this product by a person other than a trained professional may result in severe damage to a vehicle’s...

  • Page 2: Table Of Contents

    Contents Introduction Vehicle function compatibilities Pre-installation and application warnings Wiring diagram Locating components in the vehicle Vehicle connections Key2GO Connecting the module Module programming Key2GO programming using 1 key Programming using 2 keys LED diagnostics and troubleshooting Soft reset Hard reset Feature programming Feature and option list Limited one year consumer warranty...
  • Page 3 The following safety warnings must be observed at all times: • Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. • When properly installed, this system can start the vehicle via a command signal from the remote control. Therefore, never operate the system in an area that does not have adequate ventilation.

  • Page 4: Introduction

    Factory Alarm Trigger Monitoring Trunk / Hatch Release Brake Status (foot brake) Fuel Level E-Brake Status Key2GO Ignition Status Immobilizer Bypass-Data No Key Req'd Remote Start Ready 403.MA1 4.07 2013 Mazda 3 (Smart Key) © 2020-06-02 Directed. All rights reserved.

  • Page 5: Pre-Installation And Application Warnings

    SComm wire is NOT required when using Key2Go programming. It is only required when programing using the 2 key method in automatic transmission vehicles. Connection required with manual transmission vehicles. 403.MA1 4.07 2013 Mazda 3 (Smart Key) © 2020-06-02 Directed. All rights reserved.

  • Page 6: Wiring Diagram

    (-) RAP Off: Blue, pin 4 (white conn. above driver kick) Start/Stop Switch (white conn. at push button) Door Lock/ Factory Alarm (MUX): Dk. Green, pin 13 403.MA1 4.07 2013 Mazda 3 (Smart Key) © 2020-06-02 Directed. All rights reserved.

  • Page 7: Locating Components In The Vehicle

    Empty pin Diode This part can be removed because only the metal pin is needed to secure the contact in the empty pin. SComm wire from Directed Digital System Specific connection for manual transmission vehicle Upper D2D Port Clutch Switch...

  • Page 8: Vehicle Connections

    H2/11 Orange/Black (Data) RX PATS Transceiver on key slot, white 4 pin plug, pin 1 data blue H2/12 Blue/Red (-) W2W Only - Hood Output Remote Starter 403.MA1 4.07 2013 Mazda 3 (Smart Key) © 2020-06-02 Directed. All rights reserved.
  • Page 9 H4/2 Black (-) Ground H4/3 Green (Data) RX H4/4 (+) 12 Volt RF 2-pin white connector (H5) Module Conn./Pin Color Description H5/1 No Connection H5/2 No Connection 403.MA1 4.07 2013 Mazda 3 (Smart Key) © 2020-06-02 Directed. All rights reserved.
  • Page 10 BCM above driver kick, blue 24 pin plug (2), pin 23 gray Tachometer PCM on driv side of engine, plug towards frnt, pin 29, red, brown, pink, or violet (fuel injectors) 44, 59, or 58 403.MA1 4.07 2013 Mazda 3 (Smart Key) © 2020-06-02 Directed. All rights reserved.

  • Page 11: Key2Go

    Any first-time user must re-register to gain access to Key2GO, and some additional information will be required to complete the registration process, such as your Directed account number and store name. Key2GO is compatible with XKLoader2 and the online web tool, as well as XKLoader3 and the Directechs Mobile application.

  • Page 12: Module Programming

    Once the configuration is completed, reconnect the module. The LED turns ON solid green for 3 seconds, then turns OFF. You have successfully completed the module programming sequence. 403.MA1 4.07 2013 Mazda 3 (Smart Key) © 2020-06-02 Directed. All rights reserved.

  • Page 13: Programming Using 2 Keys

    Press the PTS button twice to turn the ignition ON. The LED starts flashing orange slowly. When the security light shuts OFF, press the PTS button once more to turn the ignition OFF. 403.MA1 4.07 2013 Mazda 3 (Smart Key) © 2020-06-02 Directed. All rights reserved.
  • Page 14 ON, then release. The ignition will run for approximately 5 seconds, and then turns OFF automatically. The LED will turn ON solid green for 3 seconds, and then shuts OFF. You have successfully completed the module programming sequence. 403.MA1 4.07 2013 Mazda 3 (Smart Key) © 2020-06-02 Directed. All rights reserved.

  • Page 15: Led Diagnostics And Troubleshooting

    Description Troubleshooting OBDII feature not supported. The diagnostic data bus was not detected, therefore the SmartStart features will be limited. (Flashes red, red, then orange) x 10 403.MA1 4.07 2013 Mazda 3 (Smart Key) © 2020-06-02 Directed. All rights reserved.
  • Page 16 The smart key was not detected, which prevents the system from shutting down the vehicle. Flashes red x 3 Speed was detected. The vehicle was detected as moving, which prevents the system from shutting it down. Flashes red x 4 403.MA1 4.07 2013 Mazda 3 (Smart Key) © 2020-06-02 Directed. All rights reserved.

  • Page 17: Soft Reset

    Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds until the & LED starts to flash orange and red. Solid Flashes Release the programming button. The LED turns ON solid red. & Release Solid 403.MA1 4.07 2013 Mazda 3 (Smart Key) © 2020-06-02 Directed. All rights reserved.

  • Page 18: Feature Programming

    To exit feature programming, press and hold the programming button for 3 seconds or ensure there is no activity on the interface for 30 seconds. The LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. 403.MA1 4.07 2013 Mazda 3 (Smart Key) © 2020-06-02 Directed. All rights reserved.

  • Page 19: Feature And Option List

    Smart OEM Alarm Control will monitor the alarm and door lock status to detect if the disarm or rearm is required. If the vehicle is unlocked or is not equipped with factory alarm, the disarm/rearm will not be executed. 403.MA1 4.07 2013 Mazda 3 (Smart Key) © 2020-06-02 Directed. All rights reserved.

  • Page 20: Limited One Year Consumer Warranty

    This warranty gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part.

  • Page 21: Quick Reference Guide

    This unique feature monitors a variety of parameters such as the key fob, vehicle speed sensor and door sensor, in order to perform takeover securily. 403.MA1 4.07 2013 Mazda 3 (Smart Key) © 2020-06-02 Directed. All rights reserved.
  • Page 22 Press once, then to reset the x1 + remote starter runtime. * This output is configurable. see your authorized installation center for more information. 403.MA1 4.07 2013 Mazda 3 (Smart Key) © 2020-06-02 Directed. All rights reserved.

Table of Contents