Notes On Safe Operation; Disposal; Fundamental Dangers - SCHUNK KSP3 Assembly And Operating Manual

2.13 Notes on safe operation

2.14 Disposal

2.15 Fundamental dangers

05.00 | KSP3, KSP3-LH, KSP3-F | TANDEM Clamping Block | en | 1463318
Incorrect manner of working by personnel
An incorrect manner of working can make the product unsafe
and risks serious injuries and considerable material damage.
Observe the safety notes and assembly instructions.
l
Do not expose the product to any corrosive media.
l
Products for special ambient conditions are excluded.
Rectify malfunctions as soon as they occur.
l
Observe the care and maintenance instructions.
l
Observe the current safety, accident prevention, and
l
environmental protection regulations for the application field
of the product.
Do not start the machine spindle until the force has built up
l
in the chuck jaw and clamping is complete in the permissible
operating range.
Unclamping may only occur once the machine spindle has
l
come to a standstill.
IMPORTANT!
Following a longer shutdown period (more than 8 hours), always
re-tension the clamping device in order to compensate for the
setting properties of the clamping situation or possible pressure
losses and the resulting loss of clamping force.
Handling of disposal
Incorrect handling during disposal can make the product unsafe
and risks serious injuries and considerable material and
environmental harm.
Follow local regulations on dispatching product components
l
for recycling or proper disposal.
General
Disconnect power sources before installation, modification,
l
maintenance, or calibration. Ensure that no residual energy
remains in the system.
Do not reach into the open mechanism or movement area of
l
the product during operation.
Basic safety notes
11