Eco mode
Comfort Mode
Auto Mode
Indicator pilot wire is active or
programming
Gauge
consumption
Modes selection and
set up validation
Minus button (5 sec.)
Manual activation of the open
window detection
Important: In Auto, Comfort, Eco and Standby modes, after 20 seconds timeout, the backlight switches off automatically. It will be necessary to reactivate
it by pressing a button on the control panel before setting.
Note:
Before carrying out any setting procedures, ensure that the keypad is indeed unlocked
1
Power on feature
Press the Standby button
Help for the visually impaired: sound signals
The device makes two short beeps to notify that it is in operation, in Auto mode.
2
Standby mode
This function allows you to stop the heating, for example when it is summer time. Press
the Standby button to put the device in Standby mode.
Help for the visually impaired: sound signals
The device makes one short beep to notify that it is in Standby mode.
S
ELECTION OF AN OPERATING MODE
The Mode button allows you to adapt the operating schedule of your radiator to your needs, depending on the season, whether
your home is occupied or not.
By pressing the Mode button once or several times, select the required mode.
Mode sequence:
Auto
Comfort
Eco
O
VERVIEW
P
/S
OWER ON
Frost protection
Operating
Operating
TANDBY MODE
8
Frost protection mode
Power on/Standby mode
Setting the time and date mode
Programming mode
Set temperature
Keypad locked
Heating indicator
Days of the week (1=Monday ...
7= Sunday)
Power on/Standby mode
Plus and minus buttons, used to
set temperatures, time, date and
programmes
(see page 11).
beep
beep
beep
FR9011450-60-70B-0322