Supra Dalbeo Presence 1022 Installation And Operating Instructions Manual page 6

Setting up of the radiator on the wall-mounting brackets
1- Take the radiator by the sides and lift it slightly by
presenting it parallel to the wall.
Top view
At the back of the product, make sure that each wall-mounting brackets are inserted between the intermedi-
ate fins without altering them.
The wall mounting brackets are designed to secure the installation and to limit the translational movements
of the device in case of impact.
Automatic lock of wall-mounting brackets
After the installation of the radiator on the wall-mounting
brackets, proceed to the locking proceed feature below:
1- Fold down the hooks.
2- The rivet goes down into the notch and automatically
locks the wall-mounting bracket. Make sure that the rivet
is well down at the end of the notch.
The anti-tilt safety is in place, the radiator can not be
unhooked from the wall without unlocking.
2- Place the radiator on the wall-mounting brackets.
Side view
Intermediate fins
1
6
Top view
2
FR9011450-60-70B-0322
Side view