Pin Code Lock - Supra Dalbeo Presence 1022 Installation And Operating Instructions Manual

Press Minus for 5 seconds to enter
2
the occupancy detection mode.
Open window detection, activation/deactivation of the Auto mode
From Auto, Comfort or Eco Modes:
5 sec.
Press Minus button for 5
1
seconds.
The display blinks and the
Frost protection mode
duration appears on display.
Note: Even if the auto mode is disabled, you always have the option to use the manual mode
Overview
Your heating device is protected by a safety code against non-authorised use. The PIN code (Personal Identity Number) is a customisable 4 numbers code.
When enabled, it prevents access to the following settings:
- Selecting the Comfort mode : The access to the Comfort mode is forbidden, only the Auto, Eco and Frost protection modes are available.
- Minimum and maximum limits of the set temperature range (the Comfort temperature modification is forbidden out of the authorised setting range).
- Programming mode.
- Optimisation choice.
- Open window detection settings.
- Occupancy detection settings.
- Setting the Eco mode temperature lowering-level.
- Setting the Frost protection temperature.
- Ambient temperature sensor adjustment.
5 sec.
Press Minus or Plus.
3
5 sec.
Press Mode for 5 seconds to
2
enter the open window detec-
tion mode.
PIN
CODE LOCK
= occupancy detection enabled.
= occupancy detection
disabled.
Press Minus or Plus.
3
= automatic mode
enabled.
= automatic mode
disabled.
23
To save and exit the setting press
4
Mode.
To save and exit the setting
4
press Mode.
(see page 17 chapter Manual activation).
FR9011450-60-70B-0322