Optimisation choice
The OPTI COMFORT mode is activated by default.
1
Starting from Standby mode, press Mode for 5 seconds. When the cursor moves above the setting time symbol
2
Press Mode and Plus buttons simultaneously for 8 seconds to enter in the
setting mode.
The word OPTI will appear briefly on the display then it will alternate with
the set mode "CONF", "ECO" or "OFF".
3
Press Minus or Plus.
= Optimisation feature activated for OPTI COMFORT mode,
priority to comfort
= Optimisation feature activated for OPTI ECO mode, priority to
energy efficiency
= Optimisation feature disactivated
To save press Mode. The inscription OPTI and the set mode will appear in alternation. Press again on Mode to exit setting optimisation feature and go
4
back to Auto mode.
C
ONFIGURATION OF DETECTION MODES
Occupancy detection, activation/deactivation
1
Select the Standby mode by pressing Standby.
8 sec.
22
, press Mode shortly.
beep
FR9011450-60-70B-0322