Operating; Power On / Heating Standby Mode; Wi-Fi Network Connection; Selection Of An Operating Mode - Supra Dalbeo WiControl 1022 Installation And Operating Instructions Manual

P
OWER ON
Power on feature
1
Press the Standby button
located on the side of the
device to put it in operation
in Auto mode.
Help for the visually im-
paired: sound signals
The device makes two short
beeps to notify that it is in
operation, in Auto mode.
2
Heating standby
mode
This function allows you to
stop the heating in summer,
for example.
Press the Standby button
to put the device in Heating
standby mode.
Help for the visually im-
paired: sound signals
The device makes one short
beep to notify that it is in
Heating standby mode.
W -F
I I NETWORK CONNECTION
Your radiator has been specially designed to be connected directly to your
internet provider box without any other accessories. To pair the device
with your wireless network, proceed in the following order:
From the Auto, Comfort, Com-
1
fort+, Eco or Frost protection
mode, press OK for 5 seconds.
(Pairing) and blink alternately with the ID number.

Operating

Operating
/ H
EATING STANDBY
MODE
beep
beep
beep
5 sec.
Your device is in connection mode. Please refer to the instructions
2
on your application mySUPRA and follow the instructions until the
complete connection of the device.
Note: During your pairing procedure, the following 3 screens will appear
on the radiator. You have nothing to do on the product.
1
Identification code to Security code to
select your product in confirm the connection
the mySUPRA appli- to the product in the
cation mySUPRA application
Once the product is connected,
press OK to exit the connection
mode. The device automatically re-
turns to the main display.
Advice on using and adjusting your device:
If you have connected your product, we invite you to join the mySU-
PRA ecosystem to control your radiator via your smartphone, tablet or
PC to have a much larger display.
If this is not the case, you can of course proceed directly on the product.
S
ELECTION OF AN
OPERATING MODE
The M button allows you to select an operating mode that is
adapted to your needs according to the seasons and periods
of occupancy.
Press several times the M button to select the desired mode.
Mode sequence:
Auto Comfort+ Comfort
Mode description
• Auto mode
In Automatic Mode, the device will automati-
cally change from Comfort mode to Eco mode
according to the established programme.
9
2 3
Wi-Fi® pairing in pro-
gress via the mySUPRA
application
Eco Frost protection
Display
FR9011480-90-500B-03-22