Supra Dalbeo Presence 1022 Installation And Operating Instructions Manual page 14

2
With Minus or Plus, select P1.
P1 will flash. Press Mode for 5 seconds to make changes.
3
The P1 start time (which by default is 06:00) will flash.
Using Minus or Plus, you can change this time, by increments of 30 minutes.
Save by pressing Mode.
4
The P1 end time (which by default is 22:00) will flash.
Using Minus or Plus, you can change this time, by increments of 30
minutes.
Save by pressing Mode.
5
Press Mode twice to exit the programming Mode and return to Auto Mode.
Note: without action on the keys, it will return to Auto after a few minutes.
1
1
1
14
2
5 sec.
2
2
FR9011450-60-70B-0322