Table of Contents
Advertisement
Automatic activation (factory settings):
To disable this mode,
see page
23.
The radiator detects a temperature fall. An opened window, a door to the outside, can cause this temperature fall.
Note : the difference between the air from the inside and the outside must cause a significant temperature fall to be detected by the device.
This temperature drop detection triggers the change to Frost protection mode.
Manual activation:
By pressing Minus more than 5 seconds, the device will switch on Frost protection mode.
Frost protection digital meter
When the device performs a lower temperature cycle due to opened window, a meter appears on the display to show the cycle time. The meter is auto-
matically resets at the next time to Frost protection by open window (automatic or manual activation).
Stop the Frost protection mode
By pressing one button, you stop the Frost protection mode.
Note: if a temperature rise is detected, the device may return to the previous mode (active mode before the open window detection).
Important information about the occupancy detection
The occupancy detector is sensitive to temperature variations and light. It is likely to be disturbed by the following items:
- Hot or cold sources such as forced air vents, lights, air conditioners.
- Reflective surfaces such as mirrors.
- Animal crossing in the detection area.
- Objects moving with the wind like curtains and plants.
Disable the occupancy detection if your radiator was installed near one of these.
To disable the occupancy detection,
Note: the detection range varies depending on the ambient temperature.
Overview
Dalbeo Presence fit with your lifestyle while keeping your energy consumption under control.
they
Lowering the temperature during unoccupied periods
Unoccupied periods*
* Unchangeable factory settings
Note: when presence is detected in the room, the device automatically returns to the initial mode.
Remarks:
By default, when the sensor is enabled and detects movement in the room, the display lights up for a few seconds then switches off.
backlight see page 25, backlight setting.
O
CCUPANCY DETECTION
see page
22.
20 minutes
40 minutes
1 hour
72 hours
Value of lowering set temperature*
Frost protection
17
Comfort -1°C
Comfort -1,5°C
Comfort -2°C
To change the
FR9011450-60-70B-0322
5 sec.
Advertisement
Table of Contents
