Restoring Factory Settings - Supra Dalbeo Presence 1022 Installation And Operating Instructions Manual

4
Press Mode to save and exit.
In order to a coming back to factory settings, you must hold simutaneously for 8 seconds on Mode, Minus and Plus.
If the PIN code protection is enabled, the following factory values will be effective:
Settings
Comfort set temperature
Eco mode temperature lowering-level
Frost protection temperature
If the PIN code protection is disabled, the following factory values will be effective:
Settings
Comfort set temperature
Eco mode temperature lowering-level
Frost temperature mode
Active operating mode
Counter energy consumption
Keypad lock
Active operative mode
P1
P2
P3
Dual optimisation feature
Minimum set of Comfort set temperature
Maximum set of Comfort set temperature
Occupancy detection
Automatic open window detection
Backlighting
PIN code protection
Value of the PIN code
R
ESTORING FACTORY SETTINGS
Factory settings
19°C
-3,5°C
7°C
Factory settings
Operating
19°C
-3,5°C
7°C
Auto
0 kWh
Unlock
Auto (auto-programming)
Comfort from 6:00 to 22:00
Comfort from 6:00 to 9:00 and from 16:00 to 22:00
Comfort from 6:00 to 8:00, from 12:00 to 14:00 and from 18:00 to 23:00
Advanced settings
Comfort Opti
7°C
30°C
Enabled
Enabled
L3 (temporised)
Disabled
0000
26
FR9011450-60-70B-0322