Table of Contents
Advertisement
France's Agency for Environment and Energy Management (ADEME) recommends a Comfort setting temperature lowerr or equal to 19°C.
In the radiators display, a selector indicates the energy comsumption level by positioning it in front of the colour: red, orange or green.
So, depending on the set temperature, you can choose your level of energy usage.
As the temperature setting increases, the consumption will be higher.
The gauge appears in Auto, Comfort, Eco and Frost protection modes regardless of the level of temperature.
C - Red colour
High temperature level: it is advisable to
significantly reduce the set temperature
B - Orange colour
Average temperature level: it is advisable to
slightly reduce the set temperature
A - Green colour
Ideal temperature
S
ETTING THE
You can access the Comfort temperature set up from the Auto and Comfort Mode. It is preset to 19°C.
Using Minus and Plus you can adjust the temperature from 7°C to 30°C by intervals of
0.5°C.
Note: You can limit the Comfort temperature,
C
ONSUMPTION INDICATION ACCUMULATED IN KWH
Display of the estimated energy consumption
To see this estimation, select the Standby mode, as indicated
To exit the display mode of consumption, press Mode, the device is automatically in
Standby mode.
G
AUGE CONSUMPTION
Set temperature > 22°C
When the set temperature is higher
than 22°C
19°C < Set temperature
≤ 22°C
When the set temperature is higher
than 19°C and lower or equal to 22°C
Set temperature ≤ 19°C
When the set temperature is lower or
equal to 19°C
C
OMFORT MODE TEMPERATURE
see page 20
for more details.
page
8, then press Plus.
10
FR9011450-60-70B-0322
Advertisement
Table of Contents
