Supra Dalbeo Presence 1022 Installation And Operating Instructions Manual page 13

Electric radiator with mineral oil with 7 day programme, open window detection, gauge and energy consumption indication and pin code lock
Table of Contents

Advertisement

3
The two minute figures will flash.
Select using Minus or Plus.
Save by pressing Mode.
4
The cursor above the number 1 (which represents the Monday) will flash. Select
the date using Minus or Plus.
Save by pressing Mode.
5
To exit the setting the time and day mode, press Mode.
Choices programmes
Schematic sequence of programmes:
Auto
Comfort
Eco
The radiator is delivered by default with the self-learning mode enabled as described on
nothing more to do, the radiator, after the initial 7 day learning period will follow the autoprogramme which will continue to tailor itself to your occupancy
cycles.
Programmes overview
- Auto: Auto-programming
(See Automatic programming with self-learning process page
- Comfort: your radiator will operate in Comfort mode, 24 hours a day, as regards each day selected.
Note: You can set the Comfort mode temperature to the temperature you require (see the Setting the Comfort mode temperature section
- Eco: The radiator will operate 24 hours a day in Eco mode.
Note: You can set the temperature-lowering parameters
- P1: your radiator will operate in Comfort mode from 06:00 to 22:00 (and in Eco mode from 22:00 to 06:00).
- P2: your radiator will operate in Comfort mode from 06:00 to 09:00 and from 16:00 to 22:00 (and in Eco mode from 09:00 to 16:00 and from 22:00 to
06:00).
- P3: your radiator will operate in Comfort mode from 06:00 to 08:00, from 12:00 to 14:00 and from 18:00 to 23:00 (and in Eco mode from 23:00 to 06:00,
from 08:00 to 12:00 and from 14:00 to 18:00).
Potential modifications of programmes
If the default time schedules for the P1, P2 and P3 programmes does not suit your routines, you can change them.
Modifying the P1, P2 or P3 programmes.
If you modify the time schedules for the P1, P2 or P3 programmes, the schedules will be modified for all the days of the week for which P1, P2
or P3 had been set.
1
Starting from Standby mode, press Mode for 5 seconds.
When the cursor moves above the setting time symbol
Press Minus or Plus.
Programming indicator appears.
P1
P2
P3
(see page
, press Mode shortly.
page
11. If this programme suits your requirements, you have
11).
21).
1
13
2
1
2
1
2
5 sec.
FR9011450-60-70B-0322
page
10).
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dalbeo presence 1522Dalbeo presence 2022

Table of Contents