Table of Contents
Advertisement
D
UAL OPTIMISATION FEATURE
• Optimisation choice
The OPTI COMFORT mode is enabled by default.
The inscription
appears
1
briefly on the display.
Press Minus or Plus to select
2
the desired mode.
= Optimisation feature
activated for OPTI COMFORT
mode, priority to comfort
= Optimisation feature
activated for OPTI ECO mode,
priority to energy efficiency
= Optimisation feature
deactivated
To confirm and move to the next setting, press OK. To exit experts
3
settings, press M for 3 seconds.
PIN
CODE LOCK
Overview
Your heating device is protected by a safety code against non-authorised
use. The PIN code (Personal Identity Number) is a customisable 4 numbers
code. When enabled, it prevents access to the following settings:
- Selecting the Comfort and Comfort+ modes: The access to the Comfort
and Comfort+ modes is forbidden, only the Auto, Eco and Frost protection
modes are available.
- Minimum and maximum limits of the set temperature range (the Comfort
temperature modification is forbidden out of the authorised setting
range).
- Changing the minimum and maximum Comfort setpoint range (the
Comfort temperature cannot be changed outside the permitted setting
range).
- Programming mode.
- Advanced and expert settings with for example:
- Optimisation choice.
- Open window detection settings.
- Occupancy detection settings.
- Setting the Eco mode temperature lowering-level.
- Setting the Frost protection temperature.
- Ambient temperature sensor adjustment.
3 important steps are needed for the first use of the pin code lock:
1- PIN code initialisation, enter the preset PIN code (0000) to access to
the feature.
2- Activation of the PIN Code to lock settings which will be protected by
the PIN code.
3- Customizing the PIN code, replace 0000 by the custmized code.
• PIN code initialisation
By default, the PIN code is not enabled.
1
The inscription
appears briefly on the display and then
displayed.
Press Minus or Plus to enter
2
the PIN code.
By default registered PIN code
is 0000. Press Minus or Plus to
select 0. Press OK to confirm.
For others numbers, select 0
3
by press OK. When 0000 ap-
pears, press on OK again to
save and exit.
The PIN code is initialized, the
next setting automaticaly ap-
pears: PIN Code activation.
• Customising and activation of the PIN Code
appears on the display.
1
Press OK for 5 seconds.
The 0000 code appears and
2
the first number blinks. Press
Minus or Plus to select the
first desired number then
press OK to save and exit.
Repeat this operation for re-
maining 3 numbers.
21
is
5 sec.
1
2
FR9011480-90-500B-03-22
Advertisement
Table of Contents
