Temperature Setting - Supra TINO CERAM PTC606E Instructions For Use Manual

Make sure that all products' packaging has
been removed.
Some parts of the appliance have been
lightly greased. Consequently, the first time
the appliance is used a light smoke may be
detected. After a short time, this smoke will
disappear.
To eliminate the smell given off by the
appliance when used for the first time, it is
recommended to have it on at full power for 2
hours in a well-ventilated room.
Prepare the appliance according to the function
you wish to use:
USE
Extend the cable completely before plugging
it in.
Take the length of cable required out of the
housing.
Connect the appliance to the mains.
Guide the appliance to direct the flow of air in
the desired direction.
Turn the appliance on, by using the on/off
switch (C).
The pilot light (5) comes on.
Turn the appliance on, by using the on/off
button (4).
CLOCK AND DAY OF WEEK SETTING
Press the button (7) or (III) to adjust the days.
Press buttons (II) or (VI) / (9) or (10) to select
the current day from 1-7.
1 Monday
2 Tuesday
3 Wednesday
4 Thursday
5 Friday
6 Saturday
7 Sunday
Press (7) or (III) to confirm the day
Press the button (7) or (III) to adjust the time.
Press (II) or (VI) / (9) or (10) to select the
current time.
Press the button (7) or (III) to adjust the
minutes. Press (II) or (VI) / (9) or (10) to select
the minutes.
Press the button (7) or (III) to confirm and end
the date and time set up.
3-EN.indd 2 3-EN.indd 2

TEMPERATURE SETTING

When the screen display the target set
temperature, press (9) and (10) to set directly:
Comfort mode (2) or Comfort mode in P1/P2/
P3: Press (9) and (10 to set the temperature
from 10-35 °C.
ECO mode (3) or ECO mode in P1/P2/P3:
Press (9) and (10) to set the temperature from
6-31 °C.
Note: ECO mode=Comfort mode - 4 °C
Anti-frost mode: the screen display
target temperature is 7°C. The temperature
can't be adjusted.
PRE-SET HEATING PROGRAM
P1: (Monday-Sunday)
P2:(Monday-Friday)
P2:(Saturday-Sunday)
P3:(Monday-Friday) : adjustable
P3:(Saturday-Sunday) : adjustable
P3 adjustable program setting
1. When under P3 mode, press (8) over 3
seconds to enter day setting.
2. The screen displays
to set from (Monday-Sunday). Press (8) to
confirm and enter hour setting
3. The screen displays
to set from 00-23. Press (8) to choose heating
mode for every hour (Comfort mode , ECO
mode, anti-frost mode).
4. Repeat the operation until you have
completed the schedule of every hour and
every day.
Note: After setting heating mode for hour 23,
press (9) to come back to day setting.
Note: when screen displays
. The
, press (9) and (10)
, press (9) and (10)
, press (9)
31/3/22 18:17 31/3/22 18:17