Table of Contents
Advertisement
AeGIS 7000S SERIES
1.
Log-in to programming
2. Enter 30 then #
3. Enter 0= disable (default) or 1= enable then press #
Function Code 06 - Add New Access Code
An access code is a keyless entry code to unlock the door. An access code can be programmed in 4, 5 ,6,7, or 8 digits, see
number of digit.
1.
Log-in to programming
2.
Enter 06 then #
3.
Enter the access code (4-8 digit, see
4.
Enter name up to 16 characters, then press #
5.
Enter door 1 or 2, or 3 for both, then press #
6.
Enter time zone 1-3 then press #
7.
Enter 00
(24
hours) - 20 see
8.
Enter satellite system ID 0-7
9.
Enter
0= no more additional time zone then press # and return to
1= add additional time zone then press # and return to
* = exit programming
Function Code 07 - Delete Access Code
1.
Log-in to programming
file:///C|/PACH-CO.COM-2018/online_manual/aegis7000s.htm[6/13/2019 7:18:06 AM]
function code 09
), then press #
see
Chapter 3
for keypad layout
function code 17
then press #
(enter 0 if no satellite connected to the
step 3
step 6
QR5) then press #
to program another access code
function code 09
to change the access code
Advertisement
Table of Contents
